Dress up your Engine Compartment!
Hood Pin Kit with 7/16″ Safety Pins
These kits are the safe way to keep your hood or deck lid firmly attached.
Each kit includes all of the parts needed to install two hood pins. Two chromed safety pins, scuff plates, & hardware included. 4″ pin length with 2-1/2″ threads.
The 7/16″-20 thread safety pins secure hoods with a competition look. They allow for easy removal without any extra tools.
Dress up your engine compartment for that show car look with this Mr. Gasket air cleaner.
When it comes to good looks and durability, Mr. Gasket has you covered.
Mr. Gasket’s Easy-Flow air cleaners feature a gleaming, chrome finished top cover with a plated steel base that encloses a high cfm, replaceable, flame retardant paper element. Providing the maximum in efficiency and beauty, these air cleaners are available in a variety of sizes to suit your application needs.
P/N 9790 (14″ diameter, 3″ height, 5 1/8″ flange)
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers.
Replace your rocker cover PCV valve with this chrome-plated performance breather featuring an embossed Mr. Gasket logo.
These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood.
Mr. Gasket valve cover breathers are available in push-on or push-in styles.
P/N 2057 (Fits a 3/4 in. PCV valve opening – has a 3/4″ mounting tube and an internal oil baffle with polyurethane filter element. NOTE: This is not a PCV valve, it replaces the PCV valve with a breather.)
Chrome Finish Steel
Dual Inlet Holley 4-Barrel
Gas Line Kits
The chrome plating of these Mr. Gasket gas lines dresses up your engine bay, along with providing an excellent trail for your fuel to travel along. The bright chrome plating of the gas line kit adds the special “touch of class” to your engine
They’re made of steel tubing, brass fittings, and silver-brazed connections. The hex fittings provide ample space for tightening to ensure a quick installation.
P/N 1551 (Holley 4160, 3/8″ tube, 8 21/32″ centers hose barb inlet kit)
P/N 1552 (Holley 4150, 3/8″ tube, 9-5/16″ centers hose barb inlet kit )
Designed for all out competition, these racing wire looms eliminate “cross firing” by keeping the ignition wires insulated from the steel supports and sufficiently separated from each other.
Hot headers and crossfire can create havoc with your ignition wires. Mr. Gasket has the solution in these wire loom and separator kits! These high-quality kits are designed to lift and separate your wires, helping to keep them organized and protected from damage. Each plastic divider clips to a chrome plated steel bracket, which can be attached to valve covers, intake manifolds, etc.
These looms are compatible with tall valve covers and will accommodate 7 and 8mm ignition wires.
Kit is complete with two 3-hole dividers, four 2-hole dividers, and four chrome brackets.