MSD Coils and Brackets

Blaster 2 Coil
P/N 8202



  • Improved output coil for electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series (ballast resistor required for points)
  • Durable alkyd tower with high dielectric properties is less prone to carbon tracking with wide spaced brass primary terminals prevent the possibility of spark.
  • 100:1 turns ratio and lower primary resistance produce high voltage output. These windings are held secure and kept cool in an oil filled metal canister.
  • Metal canister is filled with a premium grade oil for cooling
  • CARB E.O. Approved

There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components.

Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2.25” in diameter.

The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.

P/N 8213

This entry was posted in Featured, What's New. Bookmark the permalink.